3. TRIPLEX PLUNGER RECIPROCATING PUMP
Triplex model single acting reciprocating plunger pump is used for feeding the product to the system. The capacity of the pump is 1,690 litres/hour driven by a suitable motor hose proof to IP 55. All product contact parts are of stainless steel AISI / 316 materials and the product handling compartment is suotably jackated for hot water / steam circulation for melting the product.
4. NITROGEN PURGING SYSTEM
This consist of pressure regulating value for regulating the line pressure with two numbers gauges for reading the line pressure as well as cylinder pressure. This system has flowmeter with flow regulating value for adjusting the required amount of gas to be mixed with the products.
5. INTERCONNECTING PRODUCT PIPELINE
The interconnecting product pipeline is jackated for heating in case of product being solidified inside the pipeline. Further each section of the product pipeline is interconnected suitably for continuos heating of the entire length of the product pipeline,
6. CONTROL PANEL
This control panel not only enables smooth and trouble free handling of the product but also ensures safe operation of the plant. The unique deisgn features of the control panel prevents mishandling of the plant thereby avoiding costly damages.
The unit does not start unless temperature of the product at certain specified locations is below the specified limit.At the same time the unit does not stop even the temperature ate the specific locations goes below the specified temperature during the operation of the unit. This safety factor avoids damage to the equipments of the plant when the product inside the equipments as well as pipeline is solid in case the plant is stopped due to power failure or product change over.
The Bakery Shortening Plant enumerated above is not the only capacity limit but also we can manufacture higher production capacity plants as may be required by the clients.
We can also procure other fabricated equipments like fat blenders of various capacitiesin both Stainless Steel and Carbon Steel as per the specific requirements.